HCT Front Splitter Stock Mounting Tubes (pair)

HCT Front Splitter Mounting Tubes (pair) for Stock shock tower.

This is a replacement part to mount the front splitter to the stock bumper mount (part F3 on the parts tree). It’s unlikely this part will break, due to a long M3 hex bolt running through the entire mounting tube body, but have supplied them here for you just in case. Be sure to use the original countersunk washers from your original splitter part when assembling this. New hex bolts are supplied.

Parts:

• Splitter Mounting Tubes for Yeah Racing Shock Tower (Qty 2)
• Hex bolts (Qty 2)

This part is also included in the following kits:

HCT Pro Kit

HCT Aero Kit

Tips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).