{"title":"Tonic RC HCT Parts","description":"\u003cp\u003eThese are individual parts for the Honda City Turbo. Make sure to check out any of the HCT Kits to get discounted pricing!\u003c\/p\u003e","products":[{"product_id":"hct-front-splitter","title":"Honda City Turbo HCT Front Splitter","description":"\u003cp\u003eFront splitter with mounting posts and required hex hardware. Vertical height of splitter can be adjusted.\u003c\/p\u003e\n\u003cp\u003eNote: This splitter does not come with the magnetic hardware that fits in the magnet wells of the splitter. For the complete magnetic system, you’ll need to either buy the full kit or the rear magnetic body post part, which comes with all of the necessary magnets and hardware for fully magnetized body connection. No drilling is required, simply bolts into existing chassis parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(168, 0, 0);\"\u003eNote: If you’re using the Yeah Racing front aluminum shock tower, you’ll also need the optional \u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-front-splitter-yr-mounting-tubes-pair\" title=\"Go to Tonic RC HCT YR Splitter Mounting Tubes.\" style=\"color: rgb(168, 0, 0);\"\u003eHCT YR mounting tubes\u003c\/a\u003e for proper fitment.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts Included:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSplitter Stock Mounting Tubes (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHex bolts, stainless steel (Qty 2)\u003c\/li\u003e\n\u003cli\u003eSilver countersunk washer, aluminum (Qty 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Because of the length and width of this splitter, the front corners of the splitter may scrape on the ground when driving into aggressive turns, especially if the car is set with a low ride height.\u003c\/p\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Aero Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eAttention: Please be advised that the HCT aero parts (splitter, wing, diffuser, side skirts) are more for aesthetics than that of actual performance gains. While they might introduce some small amount of aerodynamic gains, it's unlikely that it would be of significant measure in a race situation. Also be cautious that because these aero parts are somewhat extrusive from the car's body, that it introduces added risk of breakage if it collides with another object or if the car flips over. Like with any RC car, please drive carefully!\u003c\/h5\u003e\n\u003ch3\u003eFull HCT Front Splitter \u003ca href=\"https:\/\/tonicrc.myshopify.com\/pages\/hct-front-splitter-installation\" target=\"_blank\" title=\"HCT Front Splitter Installation Instructions\" rel=\"noopener\"\u003einstallation instructions can be found here\u003c\/a\u003e.\u003c\/h3\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47123211124994,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_Tonic_RC_HCT_Front_Splitter_Main_01.jpg?v=1765490580"},{"product_id":"hct-f1-wing","title":"Honda City Turbo HCT F1 Wing","description":"\u003cp\u003eStyled in a traditional 1980’s F1 rear wing, this aero part really sets your HCT apart from the others. All hex hardware is included, but you will need to drill out the existing body wing holes (with 3mm bit) to accommodate the included M3 bolts, as they’ll provide the added strength needed to hold this larger wing than the stock wing. A printed thin wrench is included to help hold the nut in place while you screw in the bolt.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear Wing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Wing Wrench Tool\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 bolts, stainless steel (Qty. 3)\u003c\/li\u003e\n\u003cli\u003eM3 nylon locking nuts, black (Qty. 3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\" title=\"Go to Tonic RC HCT Pro Kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Aero Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eAttention: Please be advised that the HCT aero parts (splitter, wing, diffuser, side skirts) are more for aesthetics than that of actual performance gains. While they might introduce some small amount of aerodynamic gains, it's unlikely that it would be of significant measure in a race situation. Also be cautious that because these aero parts are somewhat extrusive from the car's body, that it introduces added risk of breakage if it collides with another object or if the car flips over. Like with any RC car, please drive carefully!\u003c\/h5\u003e\n\u003ch3\u003eFull HCT F1 Wing \u003ca href=\"https:\/\/tonicrc.myshopify.com\/pages\/hct-f1-wing-installation\" title=\"HCT F1 Wing Installation\"\u003einstallation instructions can be found here\u003c\/a\u003e.\u003c\/h3\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47123338723586,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_Tonic_RC_HCT_F1_Wing_Main_01.jpg?v=1765490717"},{"product_id":"hct-rear-diffuser","title":"Honda City Turbo HCT Diffuser","description":"\u003cp\u003eRear aero to the max! This HCT rear diffuser comes with mounting posts, 4 self-tapping hex screws, and the rear position light LED mount system using ten 3mm red LEDs (one is a spare) that you can simple glue into place (I like \u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/amzn.to\/4rXb5D3\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e). This will require the stock rear wheelie bar to be removed (or not installed when building). This diffuser will mount into the 4 holes that the wheelie bar used. It is advised that most of the weight of the chassis components be moved forward to reduce wheelie action (so the diffuser does not rub on the ground). In some cases, weight ballast up front can be used to counter the wheelie action. No drilling is required, simply bolts into existing chassis parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(173, 0, 0);\"\u003eNote: If you’re using the Yeah Racing rear aluminum shock tower, you’ll need the optional \u003ca title=\"Go to Tonic RC HCT Rear Diffuser YR Mounting Tubes\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-rear-diffuser-yr-mounting-tubes\" style=\"color: rgb(173, 0, 0);\"\u003eHCT Diffuser YR Mounting Tubes\u003c\/a\u003e for proper fitment.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiffuser\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounting Tubes for stock shock tower (Qty 4)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear position light housing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3mm LEDs (Qty 10)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 self tapping screws (Qty 4) 30mm double check length\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 washers (Qty 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: This kit does not include the rear exhaust pipes, as shown in the finished Honda City Turbo Senna Edition. These were simply 8mm styrene hollow tubes that I cut, painted, and glued in place.\u003c\/p\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Aero Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eTech note: Each red LED is 2 volts, 20mA, Anode (+) = longer stem, Cathode (-) = shorter stem.\u003c\/h5\u003e\n\u003ch5\u003eAttention: Please be advised that the HCT aero parts (splitter, wing, diffuser, side skirts) are more for aesthetics than that of actual performance gains. While they might introduce some small amount of aerodynamic gains, it's unlikely that it would be of significant measure in a race situation. Also be cautious that because these aero parts are somewhat extrusive from the car's body, that it introduces added risk of breakage if it collides with another object or if the car flips over. Like with any RC car, please drive carefully!\u003c\/h5\u003e\n\u003ch3\u003eFull HCT Rear Diffuser \u003ca rel=\"noopener\" title=\"HCT Front Splitter Installation Instructions\" href=\"https:\/\/tonicrc.myshopify.com\/pages\/hct-front-splitter-installation\" target=\"_blank\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/pages\/hct-rear-diffuser-installation\" target=\"_blank\" title=\"HCT Rear Diffuser Installation Instructions\" rel=\"noopener\"\u003einstallation instructions can be found here\u003c\/a\u003e.\u003c\/h3\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47126437232898,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCHCTDiffuserMain01.jpg?v=1765795701"},{"product_id":"hct-side-skirts","title":"Honda City Turbo HCT Side Skirts","description":"\u003cp\u003eThese side skirts really wrap up the uniformity body of the car. Without these side skirts, the sides of the body appear extra high. And the best part is I haven't found these side skirts to rub on the ground, even on aggressive turns. These parts are to be glued on. My preference is \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e for this type of application.\u003c\/p\u003e\n\u003cp\u003eTip: rather than gluing the entire gutter where it connects with the body, only a dab of glue at each end of the gutter is needed to hold this piece in place, in case you ever want to try to remove\/replace the part later. If this will go on a shelf queen, glue may not be needed at all.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeft HCT Side skirt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRight HCT Side skirt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\" title=\"Go to Tonic RC HCT Pro Kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\" title=\"Go to Tonic RC HCT Aero Kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eAttention: Please be advised that the HCT aero parts (splitter, wing, diffuser, side skirts) are more for aesthetics than that of actual performance gains. While they might introduce some small amount of aerodynamic gains, it's unlikely that it would be of significant measure in a race situation. Also be cautious that because these aero parts are somewhat extrusive from the car's body, that it introduces added risk of breakage if it collides with another object or if the car flips over. Like with any RC car, please drive carefully!\u003c\/h5\u003e\n\u003ch3\u003eFull HCT Side Skirts \u003ca href=\"https:\/\/tonicrc.myshopify.com\/pages\/hct-side-skirts-installation\" title=\"HCT Side Skirts Installation\"\u003einstallation instructions can be found here\u003c\/a\u003e.\u003c\/h3\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47126481436930,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_Tonic_RC_HCT_Side_Skirts_Main_01a.jpg?v=1765499811"},{"product_id":"hct-roof-scoop","title":"Honda City Turbo HCT Roof Scoop","description":"\u003cp\u003eFill in that sunroof hole with a rally-inspired HCT roof scoop! This scoop has a \u003cstrong\u003efunctional air intake that flows into the interior of the body\u003c\/strong\u003e. I used it to actively force inducted air directly into the ESC fan shroud to further cool the ESC under load.\u003c\/p\u003e\n\u003cp\u003eNote: This part in particular may need some sanding and putty work to blend with the body for the best seamless results. It is printed in high quality BL PETG-HF filament in white, but does not natively match the unpainted white body of the Honda City Turbo. An entire body spray will be required for best results, as shown in my Honda City Turbo Senna Edition video. Gluing the part with \u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/amzn.to\/4rXb5D3\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e is my preferred choice for bonding the roof scoop to the body. Again, this one part will take some advanced work to fully finish and make clean without visible seems. However, this is not an issue if you mostly want the scoop for looks and forced air induction into the body interior (to the ESC).\u003c\/p\u003e\n\u003cp\u003eAdditional Note: I had originally planned for this one part to use ABS-GF filament, but due to the toxicity of continual printing and the particle danger when printing and if the end-user wants to sand these pieces, I decided to NOT go with ABS-GF and instead go with BL PETG-HF, like all of these other parts. Like any and all printed parts, be mindful of ambient heat factors so as to not warp these parts. It’s especially dangerous inside parked cars with direct sunlight.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoof Scoop Upper Half\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRoof Scoop Lower Half\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003eHCT Pro Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Aero Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch3\u003eFull HCT Roof Scoop \u003ca title=\"HCT Roof Scoop Installation\" href=\"https:\/\/tonicrc.myshopify.com\/pages\/hct-roof-scoop-installation\"\u003einstallation instructions can be found here\u003c\/a\u003e.\u003c\/h3\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47126543892738,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_HCT_Roof_Scoop_Main_CF_BG_01.jpg?v=1765500438"},{"product_id":"hct-interior-dashboard-rhd","title":"Honda City Turbo HCT Interior Dashboard (RHD)","description":"\u003cp\u003eDashboard\/console (stock RIGHT hand drive) with gauge cluster, 9 white LEDs (one is a spare), center console LED cover, hex bolts, nuts. The driver gauge cluster and center console gauge cluster cover (black or clear) will need to be glued to the dashboard. My preference is \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e for this type of application. The small circle stickers for driver’s gauge clusters can be applied individually to each 5mm LED. I’m using M3 fine-threaded bolts here rather than self-tapping screws, as I found the fine thread actually dig into the plastic better here than self-tapping screws. No drilling is required, simply bolts into existing chassis holes.\u003c\/p\u003e\n\u003cp\u003eNote: An optional \u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-interior-dashboard-lhd\" title=\"Go to the Tonic RC HCT LHD Dashboard System\"\u003e\u003cstrong\u003eLEFT\u003c\/strong\u003e hand drive dashboard\u003c\/a\u003e is also available if you want to build an American style cockpit (this is what I did on my \u003ca href=\"https:\/\/www.youtube.com\/watch?v=A-m3j_6JmyE\" title=\"Go to my Tamiya Honda City Turbo Senna Edition video on YouTube\" rel=\"noopener\" target=\"_blank\"\u003eHonda City Turbo Senna Edition video\u003c\/a\u003e), but know that the stock driver has no way to mount on the left side without serious fabrication and modification.\u003c\/p\u003e\n\u003cp\u003eTip: It may be best to add some \u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/a.co\/d\/5badUlW\" target=\"_blank\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/a.co\/d\/5badUlW\" target=\"_blank\"\u003e\u003c\/a\u003e to permanently adhere the gauge cluster stickers to their respective parts.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterior Dashboard (RHD)\u003c\/li\u003e\n\u003cli\u003eDriver gauge cluster\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter console cover clear (use with LEDs)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter console cover black (use without LEDs)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhite Flat Top 5mm LEDs for driver’s gauges (Qty 3)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhite Diffused Round Top 5mm LEDs for center console (Qty 6)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 bolt, stainless steel (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 washer (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTonic RC gauge cluster sticker sheet (has driver gauges and center console stickers on the sheet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: If you buy this part, it will come with the gauge cluster mini sticker sheet (shown in the final image) and if you buy it as part of the \u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e the gauge cluster stickers are part of the large Tonic RC sticker sheet that is included with the Pro Kit.\u003c\/p\u003e\n\u003cp\u003eSecond to last image is an example showing the center gauge cluster with center gauge sticker mounted on clear cover and the black cover. It's advisable to use the center sticker that comes with this part on the clear cover if you intend to use the LEDs. If you know you'll never use the LEDs, then using the sticker on the black cover is advised. And again, a little bit of \u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/amzn.to\/4rXb5D3\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e is recommended to better bond the sticker to the cover (especially for the clear cover).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eDetailed installation instructions to come later (hurrying to get these parts available first!). For now, the dashboard system is the only part (in the HCT Pro Kit) that retains all of the original support trees and will need to be plucked out with needle noose pliers. The driver gauge cluster is to be glued into the main dashboard part (there are guide slots to help place the part in the right spot). Choose either the black solid plate (if supplied LEDs are not used) with rear arrow pointing up or clear plate (if LEDs are used) and glue into place. Apply gauge cluster stickers (on and plate and inside driver gauge cluster) from the supplied Tonic RC sticker sheet. The dashboard itself screws into the existing holes in the chassis with the supplied screws. More photos and details to come!\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eTech note: Each white LED is 3 volts, 20mA, Anode (+) = longer stem, Cathode (-) = shorter stem.\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47126618996994,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_Tonic_RC_HCT_Interior_Dashboard_RHD_Main_01.jpg?v=1765497198"},{"product_id":"hct-interior-dashboard-lhd","title":"Honda City Turbo HCT Interior Dashboard (LHD)","description":"\u003cp\u003eDashboard\/console LEFT hand drive for an American\/European style cockpit. Be aware you \u003cstrong\u003ecannot mount the stock driver with this dash in stock form\u003c\/strong\u003e (alternatively, use the RHD Dashboard to mount the stock driver to the existing chassis mounts). This LHD version is what I originally built in my \u003ca href=\"https:\/\/www.youtube.com\/watch?v=A-m3j_6JmyE\" title=\"Go to my Tamiya Honda City Turbo Senna Edition video on YouTube\" rel=\"noopener\" target=\"_blank\"\u003eHonda City Turbo Senna Edition video\u003c\/a\u003e (but required extensive modification to allow extra servos for driver motion, and as such, is not part of these options as of now).\u003c\/p\u003e\n\u003cp\u003eIncludes gauge cluster, 9 white LEDs (one is a spare), center console LED covers (in black and clear options), hex bolts, nuts. The driver gauge cluster and center console gauge cluster cover (black or clear) will need to be glued to the dashboard. My preference is \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e\u003ca href=\"https:\/\/a.co\/d\/5badUlW\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e for this type of application. The small circle stickers for driver’s gauge clusters can be applied individually to each 5mm LED. I’m using M3 fine-threaded bolts here rather than self-tapping screws, as I found the fine thread actually dig into the plastic better here than self-tapping screws. No drilling is required, simply bolts into existing chassis holes.\u003c\/p\u003e\n\u003cp\u003eTip: It may be best to add some \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e to permanently adhere the gauge cluster stickers to their respective parts.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterior Dashboard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDriver gauge cluster\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter console cover clear (use with LEDs)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter console cover black (use without LEDs)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhite Flat Top 5mm LEDs for driver’s gauges (Qty 3)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhite Diffused Round Top 5mm LEDs for center console (Qty 6)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 10mm bolt stainless steel (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 washer (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTonic RC gauge cluster sticker sheet (has driver gauges and center console stickers on the sheet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLast image is an example showing the center gauge cluster with center gauge sticker mounted on clear cover and the black cover. It's advisable to use the center sticker that comes with this part on the clear cover if you intend to use the LEDs. If you know you'll never use the LEDs, then using the sticker on the black cover is advised. And again, a little bit of \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e is recommended to better bond the sticker to the cover (especially for the clear cover).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eDetailed installation instructions to come later (hurrying to get these parts available first!). For now, the dashboard system is the only part (in the HCT Pro Kit) that retains all of the original support trees and will need to be plucked out with needle noose pliers. The driver gauge cluster is to be glued into the main dashboard part (there are guide slots to help place the part in the right spot). Choose either the black solid plate (if supplied LEDs are not used) with rear arrow pointing up or clear plate (if LEDs are used) and glue into place. Apply gauge cluster stickers (on and plate and inside driver gauge cluster) from the supplied Tonic RC sticker sheet. The dashboard itself screws into the existing holes in the chassis with the supplied screws. More photos and details to come!\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eTech note: Each white LED is 3 volts, 20mA, Anode (+) = longer stem, Cathode (-) = shorter stem.\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47126939369730,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/Tonic_RC_HCT_Interior_Dashboard_LHD_Main_01.jpg?v=1765510872"},{"product_id":"hct-front-splitter-yr-mounting-tubes-pair","title":"Honda City Turbo HCT Front Splitter YR Mounting Tubes (pair)","description":"\u003cp\u003eHCT Front Splitter Mounting Tubes (pair) for Yeah Racing aluminum shock tower.\u003c\/p\u003e\n\u003cp\u003eIf you installed (or plan to install) the Yeah Racing front aluminum shock tower, you’ll need these mounting tubes for best fitment. It’s what I initially developed for my Honda City Turbo Senna Edition that is shown in the build video. I later developed the stock mounting tube so that the front splitter can fit on the stock mount. Be sure to use the original countersunk washers from your original splitter part when assembling this.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter Mounting Tubes for Yeah Racing Shock Tower (Qty 2)\u003c\/li\u003e\n\u003cli\u003eHex bolts (Qty 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127016997122,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_Tonic_RC_HCT_Front_Splitter_Mounting_Tubes_YR_Main_01.jpg?v=1765512185"},{"product_id":"hct-front-splitter-stock-mounting-tubes-pair","title":"Honda City Turbo HCT Front Splitter Stock Mounting Tubes (pair)","description":"\u003cp\u003eHCT Front Splitter Mounting Tubes (pair) for Stock shock tower.\u003c\/p\u003e\n\u003cp\u003eThis is a replacement part to mount the front splitter to the stock bumper mount (part F3 on the parts tree). It’s unlikely this part will break, due to a long M3 hex bolt running through the entire mounting tube body, but have supplied them here for you just in case. Be sure to use the original countersunk washers from your original splitter part when assembling this. New hex bolts are supplied.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSplitter Mounting Tubes for Yeah Racing Shock Tower (Qty 2)\u003c\/li\u003e\n\u003cli\u003eHex bolts (Qty 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Aero Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127025221890,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/Tonic_RC_HCT_Front_Splitter_Mounting_Tubes_Parts_Stock_Main_01.jpg?v=1765707304"},{"product_id":"hct-magnetic-body-post-system","title":"Honda City Turbo HCT Magnetic Body Post System","description":"\u003cp\u003eThese parts allow you to mount your Honda City Turbo body to your chassis with magnets. The magnetic body post system comes with 10 neodymium magnets (5 pairs = 3 pairs rear, 2 pairs front), hex bolts, and nuts. Use the solid magnets on the body and the magnet with holes on the body post mount and \u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-front-splitter\" target=\"_blank\" title=\"HCT Front Splitter\" rel=\"noopener\"\u003eHCT front splitter\u003c\/a\u003e (you will bolt\/nut these in place with supplied hardware). Thread lock is advised on non-nylon-locking nuts (I typically like using removable orange thread lock). Heavy amount of \u003ca href=\"https:\/\/a.co\/d\/5badUlW\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e can hold the magnets in place on the body shell (be sure to let the glue fully cure before using the body). Use the large stock body pins that came with your Honda City Turbo to lock in the height of the rear body post.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear magnetic body post\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNeodymium magnets with holes (Qty 5)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNeodymium solid magnets no holes (Qty 5)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 18mm countersunk bolts stainless steel (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 10mm countersunk bolts stainless steel (Qty 3)\u003c\/li\u003e\n\u003cli\u003eM3 nuts (standard non-locking) for rear magnets (Qty 3)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM3 flanged nuts (standard non-locking) for front magnets (Qty 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDetailed installation instructions to come later (hurrying to get these parts available first!)\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch3\u003eFull HCT Magnetic Body Post System \u003ca href=\"https:\/\/tonicrc.myshopify.com\/pages\/hct-magnetic-body-post-system-installation\" title=\"HCT Magnetic Body Post System Installation\" rel=\"noopener\" target=\"_blank\"\u003einstallation instructions can be found here\u003c\/a\u003e.\u003c\/h3\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127051665666,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_Tonic_RC_HCT_Magnetic_Mount_Main_01.jpg?v=1765795701"},{"product_id":"hct-clear-headlight-foglight-set","title":"Honda City Turbo HCT Clear Headlight \u0026 Foglight Set","description":"\u003cp\u003eWhen I built my Honda City Turbo, I wasn’t a huge fan of the smoked headlights, so I built my own using transparent filament. And since the car didn’t come with foglights, I decided to build my own foglights as well. You’ll get two headlights with two 5mm LEDs (you can choose either cool or warm white). You’ll also get two fog lights (you can choose either cool or warm white for these a well). That’s 4 light pieces in total and 4 LEDs in total. Lights are simply glued into place (note the tabs on the headlights for positioning). I like using \u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/amzn.to\/4rXb5D3\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e\u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e for this type of application. Be sure to \u003ca rel=\"noopener\" title=\"Go to my Tamiya Honda City Turbo Senna Edition video in the headlight installation section\" href=\"https:\/\/youtu.be\/A-m3j_6JmyE?si=Tvpi9CrIZGndqP9r\u0026amp;t=2559\" target=\"_blank\"\u003edrill out center holes in the buckets of the body's headlight area\u003c\/a\u003e so that your LED wiring can go through it. Do that before gluing anything!\u003c\/p\u003e\n\u003cp\u003eNote: For reference, in my Honda City Turbo Senna Edition video, I used cool white LEDs in both the headlights and foglights. I also painted the foglights with \u003ca rel=\"noopener\" title=\"Yellow paint I used for the foglights\" href=\"https:\/\/amzn.to\/4p6234k\" target=\"_blank\"\u003etransparent yellow paint\u003c\/a\u003e for a race look.\u003c\/p\u003e\n\u003cp\u003eTip: For an even cleaner, more realistic look, as shown in my Honda City Turbo Senna Edition video, you can apply a heavy coat of thick gloss paint or even epoxy resin (UV resin is a favorite of mine) on the top surface of these lights (both headlights and foglights). It adds nice specular highlights for the glassy\/glossy look. Be sure to do this before mounting the parts into the body. After the gloss paint\/epoxy has cured and then installed in the body with glue, you can also back the rear of these parts with black paint (can simply be brushed on) to conceal the LED light so they only shine forward. Be sure to wait for the glue to cure before painting the backs of these parts.\u003c\/p\u003e\n\u003cp\u003eParts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadlights (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFoglights (Qty 2)\u003c\/li\u003e\n\u003cli\u003e5mm LEDs (Qty 4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptions (pull-down menu below):\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5mm LEDs Cool White (Qty 4)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5mm LEDs Warm White (Qty 4)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5mm LEDs Cool White (Qty 2), 5mm LEDs Warm White (Qty 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\" title=\"Go to Tonic RC HCT Pro Kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Body Bits Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-body-bits-kit\"\u003eHCT Body Bits Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eTech note: Each white LED is 3 volts, 20mA, Anode (+) = longer stem, Cathode (-) = shorter stem.\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"All Cool White LEDs (Qty 4)","offer_id":47127058546946,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true},{"title":"All Warm White LEDs (Qty 4)","offer_id":47127058579714,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true},{"title":"Two Cool White + Two Warm White (Qty 4)","offer_id":47127058612482,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/Tonic_RC_HCT_Head_Lights_and_Fog_Lights_01.jpg?v=1765794763"},{"product_id":"hct-rear-position-light-with-leds","title":"Honda City Turbo HCT Rear Position Light with LEDs","description":"\u003cp\u003eRear position light LED mount with 10 3mm red LEDs (one is a spare). Fits inside the HCT Diffuser and is to be glued in place. My preference is \u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/amzn.to\/4rXb5D3\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/a.co\/d\/5badUlW\" target=\"_blank\"\u003e\u003c\/a\u003e for this type of application. Reminder: This part is included with the HCT Diffuser system.\u003c\/p\u003e\n\u003cp\u003eNote: Soldering these 9 LEDs will take some advanced skill by running all of these LEDs in parallel and to be tuned to 2 volts maximum, which may require a voltage regulator, as shown in my Honda City Turbo Senna Edition video. \u003cstrong\u003eRunning these LEDs directly to any RC battery pack will blow the LEDs up. Likewise, a standard BEC above 2 volts output will also be too high voltage and cause failure.\u003c\/strong\u003e Make sure to use a variable BEC that can be adjusted to 2 volts or use resistors that can bring your voltage down safely to 2 volts. \u003cstrong\u003eTest your voltage with the extra LED first!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear position light housing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3mm LEDs (Qty 10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\" title=\"Go to Tonic RC HCT Pro Kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Aero Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-rear-diffuser\" title=\"Go to Tonic RC HCT Rear Diffuser\"\u003eHCT Rear Diffuser\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-rear-diffuser\" title=\"Go to HCT Rear Diffuser\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e\n\u003ch5\u003eTech note: Each red LED is 2 volts, 20mA, Anode (+) = longer stem, Cathode (-) = shorter stem.\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127063789826,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQ_Tonic_RC_HCT_Rear_Position_Light_Main_01.jpg?v=1765515934"},{"product_id":"hct-rear-diffuser-yr-mounting-tubes","title":"Honda City Turbo HCT Rear Diffuser YR Mounting Tubes (pair)","description":"\u003cp\u003eHCT Rear Diffuser YR mounting tubes for Yeah Racing Aluminum Shock Mount\u003c\/p\u003e\n\u003cp\u003eIf you’re using the Yeah Racing aluminum rear shock mount, you’ll need these parts to mount the rear diffuser. Made of hardened black nylon ABS plastic (not printed). This was the original design for mounting the rear diffuser, as seen in my \u003ca href=\"https:\/\/youtu.be\/A-m3j_6JmyE?si=m210shOUdmV6DrGe\u0026amp;t=926\" title=\"Mounting YR Rear Diffuser Tubes\" rel=\"noopener\" target=\"_blank\"\u003eHonda City Turbo Senna Edition video (@ 15:26)\u003c\/a\u003e. These also use fine-threaded bolts instead of the self-tapping screws.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear mounting tubes for use with Yeah Racing aluminum shock tower (Qty 4)\u003c\/li\u003e\n\u003cli\u003eHex bolts, stainless steel (Qty 4)\u003c\/li\u003e\n\u003cli\u003eWasher for top bolts (Qty 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127086301442,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCHCTDiffuserYRMountingTubesMain01.jpg?v=1765516645"},{"product_id":"license-plate-set-sticker-sheet","title":"License Plate Set + Sticker Sheet","description":"\u003cp\u003eI designed these super cool scaling looking license plates so the stickers fit perfectly in the license plates without gaps. Includes license plates, front and rear, in both Euro and standard sizes (4 plates in total). The Euro plate (for the rear) can squeeze in place, but glue is still recommended. My preference is \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e for this type of application. I also custom made all of these stickers, which are 1983 era theme for the most part (in homage for the release year of the original Tamiya Willy’s Wheeler). While this was originally designed for the Honda City Turbo, it can work with any 1\/10 or 1\/12 scale RC body. Also included in the sticker sheet are the gauge stickers for the center console and driver gauge cluster for the \u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-interior-dashboard-rhd\" title=\"Tonic RC HCT Dashboard System\" rel=\"noopener\" target=\"_blank\"\u003eHCT Dashboard system\u003c\/a\u003e. I designed a few bumper stickers in there for fun as well!\u003c\/p\u003e\n\u003cp\u003eLocations of these license plates include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBritish Columbia, Canada\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCalifornia, USA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGreat Britain \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNanping, Fujian, China\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNew South Wales, Australia\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOhio, USA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOntario, Canada\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOregon, USA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSeoul, South Korea\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShizuoka, Japan (Euro size for fun)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShizuoka, Japan (standard size)\u003c\/li\u003e\n\u003cli\u003eSingapore\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTexas, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEuro sized license plate (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard sized license plate (Qty 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTonic RC sticker sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-aero-kit\" title=\"Go to Tonic RC HCT Aero Kit\"\u003eHCT Aero Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-body-bits-kit\" title=\"Go to Tonic RC HCT Body Bits Kit\"\u003eHCT Body Bits Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127102259458,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCHCTLicensePlateswithStickerSheetWhiteBG01.jpg?v=1765795701"},{"product_id":"hct-front-tow-hook","title":"Honda City Turbo HCT Front Tow Hook","description":"\u003cp\u003eFront tow hook mount with red aluminum hook, hex bolt, nut. My preference is \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e for this type of application to mount the assembled unit on the back of the the front spoiler area. Part comes with M1.4 hardware (bolt and nut), but the tow hook housing will fit up to your own supplied M2 bolt and nut if desired (will require you to drill the red tow hook for the M2 bolt to fit through it). The included M1.4 bolt will require a little amount of force to “thread” into the aluminum red tow hook.\u003c\/p\u003e\n\u003cp\u003eNote: Sold as 1 item. Photos show 2 tow hooks to show individual parts and as an assembled item.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTow Hook Mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAluminum Tow Hook, red\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM1.4 bolt stainless steel 12mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM1.4 nut (removable thread lock recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Body Bits Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-body-bits-kit\"\u003eHCT Body Bits Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127110713602,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCHCTTowHookMain01.jpg?v=1765795701"},{"product_id":"hct-front-roll-cage-gussets","title":"Honda City Turbo HCT Front Roll Cage Gussets","description":"\u003cp\u003eFront roll cage gussets pair (white). The smoother printed side of these gussets are the side shown when looking through the windshield. The back side is a little rougher, but will not be visible from outside of the car. A roughly printed “L” and “R” are printed on these pieces to help guide where these parts should be positioned and glued to. My preference is \u003ca rel=\"noopener\" title=\"E6000 Glue\" href=\"https:\/\/amzn.to\/4rXb5D3\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e for this type of application. This refined part is better, smoother, and brighter (in white) than shown in my \u003ca rel=\"noopener\" href=\"https:\/\/www.youtube.com\/watch?v=A-m3j_6JmyE\" target=\"_blank\"\u003eHonda City Turbo Senna Edition video\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eParts:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeft Gusset\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRight Gusset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-body-bits-kit\" title=\"Go to Tonic RC HCT Body Bits Kit\"\u003eHCT Body Bits Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDetailed installation instructions to come later (hurrying to get these parts available first!)\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127113695490,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCHCTFrontGussetsMain01.jpg?v=1765795701"},{"product_id":"hct-front-intercooler","title":"Honda City Turbo HCT Front Intercooler","description":"\u003cp\u003eFront intercooler (silver). Direct fit to front end of body. My preference is \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e for this type of application.\u003c\/p\u003e\n\u003cp\u003eTip: Use Tamiya black panel accent wash or black hobby paint with some thinner mixed to it to add some weathered realism to this piece. \u003c\/p\u003e\n\u003cp\u003ePart:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003ca title=\"Go to Tonic RC HCT Pro Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-body-bits-kit\" title=\"Go to Tonic RC HCT Body Bits Kit\"\u003eHCT Body Bits Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127118905602,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCHCTIntercoolerMain01.jpg?v=1765795701"},{"product_id":"hct-center-mono-windshield-wiper","title":"Honda City Turbo HCT Center Mono Windshield Wiper","description":"\u003cp\u003eCenter mono windshield wiper. Homage to BTCC racing in the 1990’s! Can be glued right in the middle, as shown in my Honda City Turbo Senna Edition video. My preference is \u003ca href=\"https:\/\/amzn.to\/4rXb5D3\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003eE6000 glue\u003c\/a\u003e\u003ca href=\"https:\/\/a.co\/d\/5badUlW\" title=\"E6000 Glue\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e for this type of application.\u003c\/p\u003e\n\u003cp\u003ePart:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCenter mono windshield wiper\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThis part is also included in the following kits:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit\" title=\"Go to Tonic RC HCT Pro Kit\"\u003eHCT Pro Kit\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-pro-kit-all-hct-parts\" title=\"Go to Tonic RC HCT Pro Kit\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Go to Tonic RC HCT Body Bits Kit\" href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-body-bits-kit\"\u003eHCT Body Bits Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled\/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).\u003c\/h5\u003e","brand":"Tonic RC","offers":[{"title":"Default Title","offer_id":47127127589122,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCHCTMonoWindshieldWiperMain01.jpg?v=1765795701"},{"product_id":"countersunk-washers","title":"Countersunk Washers","description":"\u003cp\u003eAdd these colored countersunk washers to match the bling of your other custom hardware! Can be used for parts like the \u003ca href=\"https:\/\/tonicrc.myshopify.com\/products\/hct-front-splitter\" title=\"Go to Tonic RC Front Splitter\"\u003eHCT Front Splitter\u003c\/a\u003e in place of original silver countersunk washers. Sold as a pair (2).\u003c\/p\u003e","brand":"Tonic RC","offers":[{"title":"Black","offer_id":47127159636226,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":47127159668994,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":47127159701762,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":47127159734530,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":47127159767298,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/files\/SQTonicRCM3CountersunkCupWashersMulticolorMain01.jpg?v=1765520803"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/9052\/4162\/collections\/Tonic_RC_Tamiya_Honda_City_Turbo_Senna_Edition_Pro_Kit_Parts_RL_Corner_01.jpg?v=1765688921","url":"https:\/\/tonicrc.myshopify.com\/collections\/tonic-rc-hct-parts.oembed","provider":"Tonic RC","version":"1.0","type":"link"}